| Only one blade is operational with the CP-type power
cutters. These are useful when performing a cut by placing the fixed blade on materials, or when it is difficult to execute a precise cut with a cutter with two operational blades because it is difficult to take an accurate aim.
|
| Model No. | Overall
length (mm) |
Weight (g) |
Diameter |
Air pressure (N) |
| CP10 | 132 | 220 | 36 | 588 |
| CP20 | 155 | 400 | 45 | 1372 |
| CP20X | 242 | 600 | 45 | 2254 |
| CP30 | 185 | 630 | 56 | 2744 |
| CP30X | 277 | 940 | 56 | 4410 |
| * | CP20X is a boosted-up
version of the CP20 CP30X is a boosted-up version of the CP30 |
| Model No. | S-type blade foe copper |
P-type Blades for steel |
Z-type Blades for piano wire |
EP-type Blades for steel |
F-type Blades for plastics |
FD-type Blades for plastics |
| CP10 | S400 | Z400 | EP400 | F300 | FD300 | |
| CP20 | S500 | P600 | Z600 | EP600 | F500 | FD500 |
| CP20X | S500 | P600 | Z600 | EP600 | F500 | FD500 |
| CP30 | S700 | P800 | Z800 | EP100 | F900 | FD900 |
| CP30X | S700 | P800 | Z800 | EP100 | F900 | FD900 |
| Model No. | Cutting capacity (Diameter=mm) | ||||
| Copper | Steel | Piano wire | Plastics(Soft) | Plastics(Hard) | |
| CP10 | 1.6 | 1.0 | 0.5 | 4.0 | 2.0 |
| CP20 | 2.6 | 2.0 | 1.0 | 7.0 | 5.0 |
| CP20X | 2.6 | 2.0 | 1.0 | 7.0 | 5.0 |
| CP30 | 3.3 | 2.8 | 1.2 | 9.0 | 6.5 |
| CP30X | 4.5 | 3.8 | 1.2 | 9.0 | 6.5 |