|
The NETest/font> network
cable tester is a simple but comprehensive cable
tester that will diagnose wiring faults for 10BASE2
(Coax), 10BASE-T, and 100BASE-Tx, TIA-586A, TIA-568B
& Token Ring cables. It will not only identify
wiring faults such as open wires, shorts, reversed
pairs, crossed pairs, split pairs and miswiring, but
also will identify up to 4 different cables from the
tested end. With a push of a button, the NETest will
automatically scan all wires and pairs to determine
any existent faults. A large alphanumeric LED
displays the fault code; while a series of smaller
LEDs indicate which pair the fault is existent on.
For testing of installed cables, 4 remote
terminators are provided. The terminators are also
used to identify which cable is being tested. The
NETest makes cable testing for multiple LAN
interfaces virtually effortless.
|
|
Features:
-
High speed
testing and detailed fault identification of UTP/STP
and Coaxial cables
-
Verifies
adherence to 10BASE-2, 10BASE-T, 100BASE-T,
TIA-568A, TIA-568B and Token Ring wiring
standards
-
Identifies
shorted wires, open wires, crossed pairs,
reversed pairs, split pairs and miswiring
-
Split pair
detection:
-
Min. 1.2m
(about 4 Feet)
-
Max. 150m (about 492 Feet)
-
Identifies
up to 4 different cables with provided remote
identifiers (256450)
-
Large
alphanumeric LED clearly displays fault
status.
-
Includes
carrying pouch with belt loop
|
 |
|
 |
|
|
|
|
|
Order
Information
|
256450 |
NETest
?/font>
with remote unit #1,2,3,4 |
|
256451 |
NETest
?/font>
with remote unit #1 |
|
256451R |
Only Remote unit #2,3,4 |
|
|
